Our Products
Packing:-
50Kg
Description:-
Duracoat PMP is a fiber reinforced, factory blended, cement mixture designed as highly water resistant cement plaster base and finish coat. Duracoat PMP requires only the addition of water on the job site.
Typical Application :-
Is a versatile facing material that can be applied to concrete surfaces, brick & block works surfaces. both interiorly and exteriorly.
Dosage & Coverage :-
2 m2 at 15 to 20 mm thickness.
Packing:-
25 Kg.
Description:-
General purpose, non shrink, cementitious pinhole filler.
Typical Application :-
For repair to damaged reinforced concrete elements particularly where vibration of the placed material is difficult or impossible suitable for various structural strengthening measures such as encasements, builtups etc..
Dosage & Coverage :-
Each Bag Covered 12-15 Sq.ft for 1inch of repaired area W/P 0.16.
Packing:-
25 Kg.
Description:-
General purpose, non shrink, cementitious pinhole filler.
Typical Application :-
Durapoly mortor pm is to be mixed with 6-7 ltrs of water preferably in a mortar mixer. For pathching and replacement of worn areas, filling of holes or depressions in concrete floor slabs in factories, godowns, commercial or domestic buildings.
Dosage & Coverage :-
Each Bag Covered 12-15 Sq.ft for 1inch of repaired area